Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Top 10 typical forklift crashes ， forklift procedure must take notice of these issues ！.

Blog Article

Don't ignore the forklift at work. If the operation is not good, there will be major mishaps in mins, and there are several crashes entailing forklifts.

Case 1: The forklift freight obstructed the vehicle driver's view, and the individual in front could not be discovered, leading to a rolling mishap.
Situation 2: In order to keep the balance of the forklift when lifting heavy products, the workers used their body weight as the weight, which virtually created casualties.
Case 3: The width of the forklift freight goes beyond the permitted width of the route and holds on the roadside shelf, which almost creates an mishap.
Situation 4: Forklift is speeding and surrender throughout a turn.
Case 5: The forklift motorist did not see the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift lifts the personnel illegally, the forklift driver does not wear the safety belt, the forklift lifter falls and the driver is squashed when the forklift surrender.
Instance 7: The forklift chauffeur did not use a seat belt and fell from the automobile when it rolled over and was crushed.
Forklift operation need to take notice of these issues ：.

Beginning.
1. Before beginning, observe the environments, and after validating that there are no challenges that hinder the safety of driving, beep the horn first and after that start.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge need to be safe prior to starting.
3. When the forklift begins with a lots, the motorist should initially validate that the tons is stable and dependable.
4. The beginning must be slow-moving and steady.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the mast should be tilted backward. .
2. Do not lift the fork too high when driving. When going into and leaving the work site or while driving, beware that there will be no barriers in the sky. When the tons is taking a trip, the fork should not be elevated expensive, which will affect the security of the forklift. .
3. After unloading, the fork must be reduced to the typical driving position prior to driving. .
4. When transforming, if there are pedestrians or cars nearby, the driving signal ought to be released initially. High-speed doglegs are restricted. High-speed sharp turns will create the automobile to lose lateral stability and topple. .
5. When the forklift is downhill, it is strictly prohibited to switch off the fire and slide, and it is prohibited to brake instantly while driving with lots unless there are special conditions.
6. When the forklift is running, it needs to follow the website traffic rules in the manufacturing facility and have to maintain a particular safety range from the lorry in front. .
7. When the forklift is running, the tons should be in the lowest position that does not impede the driving, and the gantry needs to be appropriately tilted back. The lots shall not be increased other than when stacking or loading. .
8. The elevation of the lots have to not obstruct the vehicle driver's view. In unique circumstances, when the product influences the forward vision, drive at a low speed when reversing.
9. It is restricted to switch on the ramp, nor to drive throughout the ramp. .
10. The secure driving speed of the forklift in the factory location is 5 km/h, and it needs to drive securely at a low rate when getting in the manufacturing workshop area. .
11. When the forklift is raised, lifted or driven, it is prohibited for personnel to stand on the fork to hold things and play a stabilizing role. .
12. If troubles are located, they will be fixed and reported in a prompt manner, and they will never Stand-on Electric Pallet Stacker run with health problems or conceal them.

filling and discharging.
1. When fork-loading things, the range in between the two forks ought to be adjusted as needed to make the lots of the two forks well balanced and not skewed, and one side of the thing ought to be against the shelf. .
2. It is prohibited to collaborate with a single fork or use a fork top or draw. In special conditions, safety indication need to be established Electric Forklift Truck for Warehouse to remind surrounding pedestrians. .
3. In the process of loading and discharging products, the forklift needs to be braked with the brake. .
4. The speed of the vehicle ought to be slow and constant. Beware not to roll the wheels on the dunnage, so as not to extend the rolled items and injure individuals. .
5. When using a fork to fork the goods, the fork should be as deep as feasible under the lots, and it should be kept in mind that the fork pointer ought to not touch various other goods or objects. The tons should be supported with marginal back tilt of the gantry to ensure that the lots does not slide in reverse. The mast can be tilted onward slightly when the load is reduced to permit easy placement of the tons and removal of the forks. .
6. It is forbidden to fork goods at broadband and ram tough items with the fork head. .
7. When the forklift is functioning, it is prohibited for individuals to stand around the fork, so as to prevent the collapse of the goods and harm people. .
8. Straining is restricted, and it is banned to utilize forks to raise personnel to participate in high-altitude operations to prevent high-altitude dropping accidents. .
9. It is not permitted to utilize the brake inertia to slip, put, round or roll things. .
10. It is not allowed to use forks to pick, transform pallet discharge.

Leaving .
1. It is forbidden to leave the forklift when the products on the fork impend. Prior to leaving the forklift, you need to dump the goods or lower the fork framework.
2. Pull the emergency brake take care of to dead or depress the parking brake button.
3. The engine is turned off and the power is cut off. (Except for unique situations, such as the motorist does not leave the vehicle's view and does not surpass 1 min).
4. Eliminate the key. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the appearance must be inspected, and gas, lubing oil and air conditioning water need to be included.
2. Examine the safety performance of beginning, running and braking.
3. Check whether the lights and horn signals are full and effective.
4. Throughout the procedure of the forklift, examine whether the stress and temperature level are normal.
5. After the forklift is running, the exterior leakage should likewise be examined and the seals must be changed in time.

Forklift Safety Operation Specifications.
1. You have to check before leaving the car;.
2. When you run into someone in front of you during driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the low point of the cargo should be 0.3 m ~ 0.4 m above the ground;.
5. The turning need to not be as well sharp to avoid the propensity of " cost-free turning";.
6. Adding and down the slope should be slow-moving and uniform, and no activating the slope is allowed.
7. Do not drive throughout the gradient. When the slope is greater than 10%, the lorry must be driven in reverse when declining;.
8. When the forklift personnel bring the goods and move forward, if they come across large or hefty goods and go to the driver's line of vision, they should take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not permitted to pick up the goods by handing over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other unsafe chemicals with forks.
5. It is not allowed to utilize inertia pressure to grab the goods.
6. It is not allowed to utilize stopping pressure to exile round or easy-to-roll items.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below conditions.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the contrary side of the area with the same length as the obstacle must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844